Brooks Automation
6 Brooks Automation parts in stock · updated every few minutes
Brooks Automation parts from semiconductor fabs: FIXLOAD load port boards, BrooksNet DN I/O modules, RFID transponder readers and PRI stocker boards. New, surplus and used, each listing shows the actual unit with its part number and condition.
In stock by condition
Brooks Automation by category
Brooks Automation part numbers in stock
Tap a part number to see what's in stock
Newest Brooks Automation parts
Most are single units
-
Brooks Automation 013501-165-I4
Brooks Automation Interface Board PCB 013501-165-I4 AEZ02 Used
$210.00
-
Brooks Automation 002-8421-02
BROOKS AUTOMATION BrooksNet DN 002-8421-02
$40.00
-
Brooks Automation 013501-128-17-B
013501-128-17-B BROOKS FIXLOAD 25
$40.00
-
Brooks Automation ASC-I1 013500-552-28
BROOKS AUTOMATION p/n: TLG-I2-FL6M-01 Transponder Reader ASC-I1 013500-552-28
$90.00
-
Brooks Automation BM12901
Brooks Automation BM12901 R/E Dynamic Brake PCB Board for PRI 7000 Stocker
$70.00
-
Brooks Automation 17AEZ02
Brooks Automation BOARD 013501-16 Load Port FIXLOAD 6 P/N 013096-336-20
$385.00
Looking for a discontinued Brooks Automation part?
Send us the part number — we'll search our warehouse and sourcing network.
About Brooks Automation parts at YP Tech Solutions
These Brooks Automation parts come from wafer handling and factory automation equipment taken out of service. Each listing is one real unit, photographed with its board marking or label.
Brooks parts we list
- Wafer handling and load ports — FIXLOAD load port boards and harnesses, BrooksNet DN network I/O modules and Brooks RFID transponder readers.
- Circuit boards — 013501-series interface boards and control boards from PRI stockers.
Brooks, PRI and Azenta
Brooks merged with PRI Automation in 2002, which is why PRI stocker boards are sold as Brooks parts. In 2021 Brooks Automation renamed itself Azenta and sold its semiconductor automation business, so you may also see these parts referenced under other names. Match the number printed on the board and the load port P/N on the nameplate.
Before you order
Compare the photos with the part you are replacing and read the condition notes — the condition guide explains each grade. We are not an authorised Brooks Automation dealer. If you cannot find a part number, send it to us and we will check our stock and sourcing network.
Questions about Brooks Automation parts
Which Brooks Automation parts do you sell?
FIXLOAD load port boards, BrooksNet DN I/O modules, RFID transponder readers and circuit boards, including boards from PRI stockers, when we have them. Each listing shows the part number and condition.
Do you have parts for Brooks FIXLOAD load ports?
Yes, when we have them. FIXLOAD boards are listed under Wafer Handling & Load Ports with photos of the board number and, where available, the load port nameplate.
Why are PRI Automation parts listed under Brooks?
Brooks Automation completed its merger with PRI Automation in 2002, so PRI equipment such as its stockers became part of the Brooks product line.
Is Brooks Automation now Azenta?
In 2021 Brooks Automation, Inc. changed its name to Azenta and sold its semiconductor automation business to Thomas H. Lee Partners. Part numbers on existing Brooks boards are unchanged, so order by the number printed on your part.
Are you an authorised Brooks Automation dealer?
No. We are an independent supplier of new, surplus and used parts. Brooks Automation is a trademark of its owner and is used here only to identify the parts.
Can you find a Brooks Automation part that is not listed?
Send us the part number through Request a Part. We will check our stock and sourcing network and reply with availability, condition and price.